Advanced Settings; Network Setting; Wan - Yealink VP-2009 User Manual

IP Video Phone

Advanced Settings

The following table lists the instruction of the field about the advanced Account Setting.
Field Name
UDP Keep-alive
Message
UDP Keep-alive
Interval
Login Expire
Local SIP Port
RPort
SIP Session Timer
DTMF Type
You can only configure these settings via web interface.
3) Choose Account.
4) Choose Advanced to do the relating settings.
You can consult your system administrator for more information.

Network Setting

WAN

Configure WAN information via phone interface:
1) Click【Settings】->【Advanced】option, enter the password to enter. The default
password is admin.
2) In "Advanced" page, click【WAN】option to enter configuration page;
3) Press <OK> to pop up the pull-down menu, press Up/Down button to choose the
proper IP assignment type, press <OK> to save the changes.
Description
Defines whether
mechanism. The default is Enabled.
This parameter specifies how often the phone will send a packet
to the SIP server. Default is 30 seconds.
This parameter specifies the time frequency that phone
refreshes its registration. The default interval is 3600 seconds.
Local SIP port. The default value is 9060.
The parameter allows you configuring the proxy to send
responses back to a particular address and port. The default is
disabled.
This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of
SIP sessions through a re-INVITE or UPDATE request. The
refresh allows both user agents and proxies to determine if the
SIP session is still active.
Select the DTMF type.
- 48 -
Using the Advanced Phone Functions
to active the phone UDP Keep-alive