Part Iv Registering Phone; Manual Configuration; Uad Settings; Creating Extension - Yealink SIP-T18P User Manual

4 Yealink Phones User Guide
Login to phone web administration interface with your username and password.
Please note, factory default login details are username: admin and password:
admin.
Click on Upgrade tab.
Click on Reset button in order to reset the phone to factory settings. Phone will be
reset to the factory settings and reboot.
Wait sometime prior for device to reboot.
N O TE
and configurations.
4

Registering Phone

This chapter describes how to identify Yealink phone model, requirements that must be
met and how to register the phone using manual configuration or auto provisioning.
The following topics are covered:
-

Manual Configuration

- Auto Provisioning
4.1 Manual Configuration
This chapter describes how to set UAD settings, create PBXware extension and register
the phone using Hostname or IP Address, or DNS SRV.
The following topics are covered:
-

UAD Settings

-

Creating Extension

- Registering Phone
4.1.1 UAD Settings
1. Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the
PBXware web administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
2. UAD settings
Navigate to Settings:UAD.
Do not unplug or rem ov e power to the phone while it is updating firm ware
© 2003 - 2012 Bicom Systems