Power Adapter; Power Over Ethernet (Poe); Ip Address; Factory Settings - Yealink SIP-T18P User Manual

-

Power over Ethernet (PoE)

-

Factory Settings

3.1

Power Adapter

1. Connect the Network and Power
Connect the DC plug on the power adapter to the DC port on the phone and
connect the other end of the power adapter into an electrical power outlet.
Connect the ethernet cable between the Internet port on the phone and the
network port on a router or switch to access LAN.
N O TE
AC adapter. M ake sure the Ethernet cable and router or switch is Power ov er
Ethernet (PoE) com pliant.
3.2 Power over Ethernet (PoE)
1. Connect the Network (only)
Using a regular ethernet cable, your phone can be powered from a Power over Ethernet
(PoE) compliant router or switch.
Connect the Ethernet cable between the Internet port on the phone and an
available port on the in-line power router or switch.
N O TE
AC adapter. M ake sure the Ethernet cable and router or switch is Power ov er
Ethernet (PoE) com pliant.
3.3

IP Address

1. Find out your Yealink phone IP Address
For Yealink phone models SIP-T20P, SIP-T22P, SIP-T26P, SIP-T28P, SIP-T60P
and SIP-T65P on the phone keyboard press Menu then Enter button to see the
phone IP address on the display. For the Yealink phone model SIP-T18P pickup the
handset and dial **90#.
3.4 Factory Settings
1. Reset to factory settings
This step is not required for out-of-the-box phones, however, if the phone has been
already used then it is a must.
Open a new browser window and enter your phone IP address in order to access
the phone web administration interface login screen. Example:
http://192.168.1.22.
© 2003 - 2012 Bicom Systems
If y ou are using Power ov er Ethernet (PoE), y ou don't need to connect the
If y ou are using Power ov er Ethernet (PoE), y ou don't need to connect the
Installation 3