Table of Contents
Advertisement
8-Macro logic
8-Program Macro Logic
Menu:
Use the menu for macro logic programming.
Macro logic provides a powerful tool for activating event flags when specific
events occur. These events are macro inputs being triggered, logic equations
combining the macro inputs, and timed/latched output conditions.
Up to four macro inputs may be included in the logic equation. A macro input is
an event flag. Each macro input in the logic equation can be programmed as an
AND or an OR function and may be inverted.
Options are provided so that the macro's result will trigger a macro output which
may be; a pulse, timed, on delay, off delay or latched when activated.
The event flags are pre-defined Event flag Numbers as listed in "Macro event
flags" on page 52). Some can only be used for macro inputs; some for macro
outputs and others may be used for both.
For more information on Macro Logic programming, refer to the programming
guide for any Advisor Master control panel.
Caution:
It is very important to plan the macro logic carefully on paper, noting all
details before attempting to program.
Macro logic program number
Macro Logic Number
Marco No:
Enter the number of the Macro logic program. There are 48 programs available.
Function and output event
MX, E0 Disabled
*-Chg,Event:
The result of, the macro logic and the macro output function will trigger an event
flag. The macro output may have timing functions.
•
Disabled: This macro logic program is disabled.
•
Non Timed: Follows the result of the logic equation only. If a macro input (an
event flag or an output) for this macro changes, the logic equation will be
calculated again.
•
On Pulse: Activates for the programmed time or the active period of the logic
result, whichever is the shortest.
•
On Timed: Activates for the programmed time regardless of the macro inputs
changing.
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide
45
Advertisement
Table of Contents
