Table of Contents
Advertisement
ABORT LIGHT
The abort light will flash during an abort delay time. If a code is entered while this light
is flashing, all abortable reports will stop the communication process. Note: The abort
feature must be enabled. Entering a code during or after an alarm report to the
central station will cause the abort light to come on. It will stay on until the central
station has received the cancel report. Note: The cancel feature must be enabled.
AWAY - STAY - NIGHT KEYS
The away, stay, and night keys are "on" when the system is armed to one of these
corresponding modes. The armed, stay, and night keys are "off" when it is disarmed.
The armed, stay, and night keys will flash when there has been an alarm during the
previous arm cycle.
BYPASS KEY
The bypass key is illuminated when any zone in this keypad's partition is bypassed.
The zone(s) that is bypassed will also be illuminated. If the bypass key is "off", no
zones are bypassed.
CHIME LIGHT
The chime light is "on" when the chime feature is "on"; "off" otherwise.
FIRE LIGHT
A steady fire light means a fire zone has been faulted. A rapidly flashing fire light
means that a fire zone is in a trouble condition.
POWER LIGHT
The power light is on if the primary power is on. The power light will flash if the system
has a low battery condition.
READY LIGHT
The ready light is "on" when the system is ready to arm and "flashes" if ready to force
arm. The ready light is off when the system is not ready to arm because of a zone(s)
being faulted.
SERVICE LIGHT
The service light is "on" when the system requires service. Press [7]-[2] to determine
the service condition then refer to page 13 for details.
ZONE LIGHT
The zone lights are "off" when everything is normal. A zone light will be "on" if the zone
has been bypassed. If a zone light is "flashing", that zone is in alarm or has been
faulted. If a zone light is "flashing" rapidly, it means that the zone is in a trouble
condition. Trouble conditions are:
Tamper
(A combination of Alarm/Fault and Tamper/Trouble will produce a rapid "flashing" light
for a short period of time, followed by a slow "flashing" light.)
LED Keypad
UNDERSTANDING THE LIGHTS
Hardware
Low Battery
Loss of Supervision
Advertisement
Table of Contents
