Table of Contents
Advertisement
10-MAINTENANCE AND CLEANING
CLEAN THE EXCHANGER AND THE UNDERGRATE SPACE EVERY 2/3 DAYS
Cleaning the exchanger and the undergrate space is a simple operation but very important for always maintaining performance as
declared.
Therefore we recommend cleaning the internal exchanger every 2-3 days, performing these simple operations in sequence:
Activate the "CLEANING" function – when the boiler is switched of press - menu, select"Settings", with the <> arrows select
•
"Cleaning", confirm with "Menu", activate cleaning "ON" by pressing the +- keys. This procedure activates the smoke extraction fan
on maximum power to expel the soot that is dislodged when the exchanger is cleaned.
•
Cleaning the pipe unit – Use the handle for cleaning, located under the front cover, illustrated by the arrow in the drawing, shake
the handle approximately 5 times forwards and backwards. This will remove any soot that has deposited on the exchanger smoke
ducts during normal boiler operation.
•
Disable the "CLEANING" function - this function is automatically disabled after two minutes. If one needs to stop this function
in advance press the "Esc" key.
•
Clean the smoke conveyor compartment (fig.2) - The boiler is fitted with three removable pans to clean out the ash, designed
to collect any soot and ash build-up. To empty the pan F it is necessary to grasp the handle E, lower it and pull the drawer outwards.
To empty pans H it is necessary to turn the two hooks on the front of the pan and pull towards yourself.
When cleaning is finished, close the cover back up and put the ash pans back in place H and F.
•
If such cleaning is not done every 2-3 days the boiler could go into alarm caused by ash clogging after several hours
of operation.
HANDLE TO CLEAN PIPE UNIT
Figure 1
Technical Dept. - All rights reserved - Reproduction is prohibited
G
E
F
Figure 2
H
47
Hide quick links:
Advertisement
Table of Contents
