Table of Contents
Advertisement
8 - MENU ITEMS AND OPERATION
IMPORTANT!
Set up all of the electrical and hydraulic connections to the hydraulic kit, purchased separately, following the
instructions of the dedicated manual.
START-UP
Press key 1 (esc) to begin start-up, the control panel displays ON with a flashing flame. When the flame stops flashing the boiler has
reached the "power output" operating mode.
The room temperature set by default is 20°C, if one wishes to change it act as instructed in the adjustments menu; act likewise to set the
heating water temperature and the room fan speed. To activate external thermostat if any see the relative section.
POWER OUTPUT
Once the start-up stage is complete the control panel will display ON with a fixed flame at level 3
at lower or higher powers is managed autonomously and upon reaching the temperatures set in the "System configuration".
Technical Dept. - All rights reserved - Reproduction is prohibited
. The subsequent flame modulation
41
Hide quick links:
Advertisement
Table of Contents
