Table of Contents
Advertisement
8 - MENU ITEMS AND OPERATION
NOTES FOR TIMER OPERATION
•
Start-up with the timer always takes place with the last temperature and ventilation settings (or with default 20°C and V3 settings in the
event they have never been changed).
•
Start-up time ranges from 00:00 a 23:50
•
If the shutdown time is not already memorised, it proposes a start-up time in + 10 minutes.
•
A timer programme switches the boiler off at 24:00 of one day and another programme switches it on at 00:00 of the next day: the boiler
stays on.
•
A programme proposes a start-up and shutdown in times included within another timer programme: if the boiler is already on, start will
not have any effect, while OFF will switch it off.
•
In the boiler on and timer active condition, press the OFF key and the boiler will switch off, it will switch on automatically at the next
time set on the timer.
•
In the boiler off and timer active condition, press the ON key and the boiler will switch on, it will switch off at the time set on the active
timer.
Sleep setting
The sleep function is activated only when the boiler is switched on and allows to quickly set a time at which the product must switch off.
To set the Sleep function act as follows:
•
Enter MENU
•
Scroll to SLEEP with the <> arrows
•
Press Menu
•
With the + - keys adjust the desired shutdown time.
The panel proposes a shutdown time of 10 minutes from the current time, adjustable with key 4 until the next day (I can therefore delay
the shutdown for up to a maximum of 23 hours and 50 minutes).
If the SLEEP function is active with the TIMER active the first has priority over the latter, therefore the boiler will not switch off at the time
set on the timer but instead by the time established by the sleep function, even if later than the time set on the timer.
ADJUSTMENTS MENU
This function is used to adjust room temperature, water temperature and the speed of the exchanger.
To access the adjustments menu act as follows:
•
Press the + - keys
•
Scroll with the <> arrows and select "Set Room T" or "Set Water T" or "Exchanger Exchanger"
•
Press "menu" to access the selected option.
•
Modify with the + - keys.
•
Press "menu" to confirm and "esc" to exit.
Technical Dept. - All rights reserved - Reproduction is prohibited
29
Hide quick links:
Advertisement
Table of Contents
