Optional Equipment; Lp Conversion Instructions - Travis Industries DVS GSR Insert Owner's Manual

Optional Equipment (for qualified installers only)

LP Conversion Instructions

The GSR Stepper Motor Kit (SKU 94400999) is required for converting this appliance
to LP. The kit contains the stepper motor (regulator), torx wrench, and pilot orifice.
The burner orifices and burner gaskets are shipped with the appliance.
Convert the appliance prior to installing the gas line to ensure proper gas use.
1 Remove the glass (see page 20). Remove the logs and embers (if installed - page 22)
2 Remove the ember trays and burner (see below). Grasp the burner with both hands and lift it straight
up and out of the firebox.
3 Remove the manifold cover to access the burner orifices (see below).
© Travis Industries 4090812
45
100-01232_001