Starting The Heater For The First Time; Location Of Controls - Travis Industries DVS GSR Insert Owner's Manual

Starting the Heater for the First Time


Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will
cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This
is normal. We recommend opening a window to vent the room.

Condensation may appear on the glass each time you start the heater - this is normal.

Blue Flames will occur on the heater when it first comes on. After fifteen minutes the flames will turn
a more realistic yellow and orange color.

Verify the power backup and control light batteries are installed (see page 38).

Location of Controls

Swing the access door and control cover
down to access the controls on the insert.
HIGH
OFF
LOW
ACCENT LIGHT
© Travis Industries
Operation
Most features will be controlled by the included
remote.
CONTINUOUS
PILOT
GREEN SMART
PILOT
4090812
ON REMOTE OFF
PRG
100-01232_001
29