Travis Industries DVS GSR Insert Owner's Manual page 46

46
Optional Equipment
4 Follow the directions below to replace the orifices.
1/2" Wrench
5 Replace the manifold cover. Place two orifice gaskets (included with appliance) on the front orifice
(see illustration below).
© Travis Industries
Rear Burner Orifice
Front Burner Orifice
Use a 1/2" open end wrench
a
to unscrew the two orifices.
c
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
15/16"
24mm
(for qualified installers only)
b
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
NG
Front #50
#47
Rear
4090812
LP
#56
#56
100-01232_001