Loading Paper; Removing Paper; Additional Devices - Philips Magic 3-2 User Manual

User Manual
5 Break out the new Plug'n'Print card and insert it in
the slot to the left of the ink film compartments.
6 Close the machine by swinging the operation panel
forward, until it snaps in.

Loading paper

Before you can copy documents, paper must be loaded
in your fax machine. Please use only the following pa-
per format: standard A4 210 × 297 mm. The fax ma-
chine works with normal paper used for writing and
copying and has been optimised for smooth 80g/m
paper. The smoother the paper surface the better the
print quality.
1 Insert the paper tray in the slots provided behind
the paper feed mechanism.
2 To prevent several sheets being drawn into the ma-
chine at once, first fan out the paper to separate the
sheets and then straighten the stack on a flat surface
before inserting it into the paper feed.
12
3 Pull the paper feed flap fully forward until it stops. In-
sert several sheets of A4 paper (80 g/m
stop in the paper feed mechanism (max. 50 sheets).
4 Close the paper feed flap.
Never load paper while the fax machine is printing!

Removing paper

2
To remove the paper, open the paper feed flap and
carefully pull out the paper. Close the flap again.
In the event of a paper jam see Hints and Tips /
Paper jam.

Additional devices

In addition to your fax machine, you can also connect
other devices, such as additional telephones, cordless
telephones, call-fee indicators, answering machines or
modems to a single telephone line. For UK: As long
as the Ringer Equivalent Number (REN value) on the
line doesn't exceed 4. The REN value of this fax is 1.
2
) up to the end-