En Installation Guide; Contained In The Packing; Attaching The Document Support; Loading Paper - Philips LASERFAX 920 User Manual

Installation Guide

Contained in the Packing

1 Device
‚ Device
2 Telephone handset (Type 3)
ƒ Telephone handset (LPF¦925, LPF¦935)
3 Spiral cable for telephone handset (Type 3)
„ Spiral cable for telephone handset (LPF¦925, LPF¦935)
4 Document Support
... Document support
5 Paper Tray
† Paper tray
6 Document Outlet Tray
‡ Document outlet tray
7 Mains Cable
ˆ Mains cable with plug (country-specific)
8 Telephone Cable
‰ Telephone cable with plug (country-specific)
9 Starter Cartridge
Š Starter cartridge
User Manual
User manual with installation guide (not depicted)
Installation-CD (Type 4)
Installation-CD (LPF¦935, LPF¦940) (not depicted)
Verpackungsinhalt
Packing Contents
If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.

Attaching the Document Support

Attaching the Document Support
Insert the document support into the two openings in the
cover. The document support should snap securely into
place.
Dokumentenhalter anbringen
Installation Guide

Loading Paper

Initial operation
Initial operation: Please remove the protective
cardboard from the paper tray before loading paper
and replacing the paper tray into the device.
Requirements
Before you can receive documents or make copies, you
must load paper into the device. Please use only appropri-
ate paper in standard format A4 · 210¦×¦297 millimetre
2
· preferably80¦g/m . Follow the specifications in the tech-
nical data.
Loading Paper
Separate the paper sheets by fanning them out, then
align them by tapping edge of the stack lightly
against a flat surface. This will prevent several sheets
of paper from being drawn in all at once.
Preparing Paper
1 Remove the cover from the paper tray.
Initial operation: Please remove the protective
cardboard from the paper tray before loading pa-
per and replacing the paper tray into the device.
2 Put in only as much paper as will fit under the raised
limit markers on the upper edge of the paper tray (see
also the drawings on the cover of the paper tray). You
can load up to 250 sheets.
If you would like to print on an input sheet (for
example, forms or stationery), place the input
sheet face down in the paper tray, with the top of
the page toward the rear.
Forms that have been printed out by a laser print-
er are not suitable for further printing. This can
lead to a paper jam.
EN
3