Advertisement
Connection of a DiSEqC switch
Connect the cable from the LNB intended for channels from Thor
to the connector marked LNB 1 (A) on the switch, and from Sirius
to the connector marked LNB 2 (B).
Connect the antenna cable to the connector marked Receiver
OUT on the switch. Connect the other end of this cable to the
input marked ANTENNA on the Mediamaster.
If you have a double coaxial cable you can connect the cable from
Sirius directly to the input marked ANTENNA on your
Mediamaster without using a DiSEqC switch. Follow the instruc-
tions for "Antenna with one LNB for Sirius" on page 13 in the
Users Manual.
Antenna- /satellite configuration
• Select alternative two (2) for "Multisatellite/DiSEqC Switch
Configuration
• Press the OK button.
Antenna adjustment
Switch type and port
• Select DiSEqC/2 for Sirius.
LNB type
• Select Universal as LNB type.
LNB Offset voltage
If the cable down from any of the LNB's is very long, it might be
necessary to increase the voltage to these LNB's by 0,5 V by
pressing
or
.
Satellite
• Select Sirius.
Predefined Channel
Select one of the predefined channels.
• Press the OK button.
If the antenna needs adjustment, see page 13 "Antenna with one
LNB for Sirius" in the Owners Manual.
When you do have a picture and press OK to continue, you re-
ceive a confirmation on the TV screen that the configuration of
the DiSEqC 2 input is ready. You will also be asked if you want to
configure another DiSEqC input.
• Press BACK to start the channel search procedure.
3
Advertisement
