Reboot The Nvr - Seenergy SVR-504 User Manual

SVR-500 Series
Network Video Recorder

Reboot the NVR

Reboot the NVR after you upload a new firmware. You would need
to manually reboot the system for the new firmware to take effect.
Such process would prevent a recording from getting interrupted be-
cause the system would not automatically reboot itself after the new
firmware is loaded onto the recorder.
Simply click "Restart" to begin the reboot process and confirm the
action:
The restart process should be displayed and you should be prompted
back to the "Maintenance" page after it is complete:
92