Connect To The Nvr; Use Nvr Search Utility - Seenergy SVR- 632 User Manual

Connect to the NVR

There are various ways you can connect to the NVR and below are the
suggested methods for different network setup:
• The NVR is placed in a network with a DHCP server: Connect to
the NVR by using "NVR Search" Utility
• The NVR is placed in a network without DHCP server (or you are
connecting to it directly): Access the NVR with its default IP

Use NVR Search Utility

If the NVR is placed in a corporate network or a local area network
where a DHCP server is already presented, run the "NVR Search"
utility from a computer that is on the same network and locate the
NVR with its IP address that is assigned by the top-level DHCP server.
SVR-­‐632 U ser's M anual 11