Seenergy SVR-504 User Manual page 86

SVR-500 Series
Network Video Recorder
The "recording buffer" allows user to define "pre-alarm" and "post-
alarm" time for event recordings. The "pre-alarm" time sets the NVR
to record in advance when an event is triggered. The "post-alarm"
time sets the NVR to continue recording for a period of time after an
event trigger is finished.
Recording frame rate allows you to set different frame rate for dif-
ferent types of recording instead of recording at one frame rate only.
Use the drop-down menu and select one of the pre-defined frame
rates for a particular recording type
You are able to use the same video format for recordings or you can
choose other formats for different recording purposes if it's a multi-
stream capable camera.
If you chose to use a different video format for recording, you are
able to adjust its detail settings by clicking on the "...".
A new dialog will pop out for further detail configurations. Noticing
the "Frame rate" in this dialog represents the live fps that will be set
back to the camera for this particular video format. You can configure
the recording fps for different types of recordings individually.
86
* The "Pre-alarm" function only
works when the "Continueous"
recording is also activated.