Disk Setup - Seenergy SVR-504 User Manual

SVR-500 Series
Network Video Recorder
3.1.6 Disk Setup (SVR-504/508/516 ONLY
Once you install a hard disk to the recorder, you would need to ini-
tialize it so that it can be ready for recording. You can obtain basic
information about the disk you installed in this page
To initialize it, simply click the "Format" button
You can also connect external USB thumb drive to the recorder for
firmware upgrade.
For instructions to install a hard disk to the recorder, refer to page 9
To obtain detail information about the disk, go to "System Options" >> "Disk
Status"
58