Event Triggers - Seenergy SVR-504 User Manual

SVR-500 Series
Network Video Recorder

3.3.4 Event Triggers

We have finished defining how an event will be triggered and which
servers will be receiving notifications in the previous two sections,
now we can finish up the event configuration by setting:
• which channels will have event trigger function enabled
• What is considered to be an event
• Where the warnings will be sent to and how they will be sent
Select Channels to Enable Event Trigger and which type
of event should be triggered
• Use the checkbox to enable event trigger on the desired
channels
* Once motion detection is enabled in this page, please configure the motion area
and enable motion detection in the corresponding channels (cameras). The NVR
only detects the first motion area set in the camera. The NVR recognizes the first
motion area by its ID number set in the camera.
* Enabling the "custom event" option allows the NVR to receive events from the
CMS software and start recording; events such as the intelligent video detection
in the CMS.
83