Ptz Preset Sequence - Seenergy SVR-504 User Manual

SVR-500 Series
Network Video Recorder

3.2.4 PTZ Preset Sequence

Once you have multiple preset points defined for a camera, it is con-
venient for monitoring to set up the sequencing viewing among those
preset point and let the recorder automatically switch between them
for you.
To configure preset sequence for a camera, select a channel from the
"Channel" drop-down menu
The available preset points should be listed in "Camera Presets" sec-
tion
Pick the ones you like for sequence viewing and press the "->" button
to move them to the "Preset Sequence" section, then use the up and
down buttons to adjust their sequencing positions.
Finally, select a dwell time from the drop-down menu and click "Ap-
ply" to save the configuration
• To start preset sequence viewing, check page 21 for instructions
72