Seenergy SVR-504 User Manual page 66

SVR-500 Series
Network Video Recorder
2. After that, the search should begin and its status should be dis-
played:
3. Found cameras should be listed and simply select a camera from
the list and press "Configure"
4. Its corresponding information should be displayed in the "Camera
Information" section. Enter its username and password and select
the channel ID and name the camera.
5. Once the camera's settings are polled and displayed, you can also
enable "continuous" recording and adjust its recording quality set-
tings before adding the camera.
Some cameras are capable of multiple streaming profiles, in which
different video codecs are used for different purposes.
You will be able to use different video format for continuous record-
ing if it's a multi-stream capable camera.
66