Event Servers - Seenergy SVR-504 User Manual

SVR-500 Series
Network Video Recorder

3.3.3 Event Servers

Event servers are to be used with event trigger actions. In case of
unusual motion detected by the camera or a disk failure, the recorder
can send notification with the acceptable format (image/txt) to a
destined event server according to the configuration.
Configuring an FTP server
To add an FTP server,
1. Start by giving a name to the server that you are adding to the
recorder
2. Enter the FQDN or the IP address of the FTP server
3. Enter the communication port of the FTP server (usually port 21)
80