Connectors; Hard Disk Connectors: Ide1 & Ide2 - VIA Technologies EPIA-PE User Manual

BIOS Setup
C
ONNECTORS
Hard Disk Connectors: IDE1 & IDE2
The two IDE connectors support Ultra DMA 66/100/133 modes. Both IDE
connectors can connect a master and a slave drive. The IDE connectors can
support up to four IDE devices.
If two drives are connected to a single cable, the jumper on the second
drive must be set to slave mode. Refer to the drive documentation supplied
by the vendor for the jumper settings.
VIA
VIA
C3
VT8235M CLE266
EBGA
IDE1
IDE2
15