M-Type Magazines; M-Film And Reel Checks - Kodak i7300 User Manual

M-type magazines

M-Film and reel checks

A-61404 February 2003
To insert the reel into the magazine:
Orient the magazine as shown in the illustration. Remove the two
retainer screws and set them aside. Separate the two parts of the
magazine.
Place the film into the magazine with the film feeding
counterclockwise off the reel.
Place the two parts of the magazine together and replace the two
screws.
CAUTION: Core fillers should not be used and existing fillers
should be removed from reels. Damage could occur to
your film and/or the scanner if core fillers are used.
Reels used with the scanner should be Kodak Solid Flange Reels (or
equivalent).
Reel Flange
1/4 Inch
Maximum
The amount of film on the reel should not go past the arrows indicated
on the reel; there should be at least a ¼-inch distance from the edge of
the reel to the film.
Film
21