Start-Up And Configuration; Step 1: Charge The Battery - Silvercrest DV-5300HD User Manual And Service Information

English
5

Start-up and configuration

This section describes the basic functions such as how to switch on the cam-
era, insert the battery and the memory cards and configure the basic settings.
5.1

Step 1: Charge the battery

The battery may only be charged with the supplied charger or with an
original replacement charger. In the event of non-compliance the battery
can be destroyed. This can cause a fire.
Note: The battery is also charged when the camcorder is connected to a
functioning computer by means of its USB interface.
The battery charging time is approx. 180 minutes when using the charger and
approx. 240 minutes when using a USB connection.
18
1. Place the battery in the charger.
2. Connect the charger to an easily accessible
mains socket with the mains cable.
The LED on the charger lights up orange
while the battery is charging. When the battery
is fully charged the LED lights up green.
The charging time depends on the output ca-
pacity of the battery and the charging condi-
tions.
Silvercrest DV-5300HD