Editing Network Name - ASCOM OfficeT User Manual

Networking
Rename
L M
78

Editing network name

The name of each subscribed network can be changed to provide
a personal identity for your Cordless telephone. The name can be
chosen freely and is shown on the display when the Cordless
telephone is connected to that network and in stand-by. The
default name is "Work".
Work
01-Dec 11:32
To edit the network name
Route: Networks » Rename
Select
Press
The first network name in the subscription list is displayed.
Select the name to edit
Press
z
"Edit Name:" is displayed.
Change the name (to a maximum of ten letters)
Press when you finish
Tips:
With respect to the number keys consider the following:
press the key which has the letter of the name you want.
Press once for the first letter of the key, twice for the second
and three times for the third letter of the key.
To insert lower case letters, press the letter first and then the
"star"key. Repeat the procedure to revert to upper case
again.
The Cordless telephone can display several special
characters. See section
details.
132
"Phonebook" on page 45
Cordless telephone OfficeT
2006-05-24/ Ver. B
TD 92282GB
for more