Changing The Dialling Mode; Sending A Dial Tone Pause - ASCOM OfficeT User Manual

GoToDTMF
DTMF-Long
Cordless telephone OfficeT
2006-05-24/ Ver. B

Changing the dialling mode

If your phone system normally uses pulse dialling you can switch
between long and short DTMF tones if required. For some tele
services the standard tones sent out by the Cordless telephone are
too short. In this case the Cordless telephone must be switched to
"long tones".
To switch the Cordless telephone to short tones during
a call
Select
Press
The Cordless telephone now uses short DTMF tones.
To switch the Cordless telephone to long tones during a
call
Select
Press
The Cordless telephone switches to long tones for the duration of
the call. If the Cordless telephone is set to long tones, the tones are
transmitted for the same length of time as you keep the keys
pressed down.

Sending a dial tone pause

To insert a dial tone pause while dialling on hook
Press for one second
TD 92282GB
Advanced Telephoning
43