Receiving A Call; Operating Area - ASCOM OfficeT User Manual

Getting Started
>
>
24
Handsfree:
While you are waiting for a connection, dial tone or during the call:
Press to switch the call to handsfree speaking mode
You are connected to the caller via the loudspeaker and
microphone.
Press to end the call
The duration of the call is displayed.

Receiving a call

After switching on, the Cordless telephone is in stand-by mode. In
this mode the Cordless telephone is ready to receive calls.
When the Cordless telephone rings:
ExternalCall
Anna
Press to answer the call
Press to end the call
The duration of the call is displayed.
On an incoming call, the caller's (extension) number may be
displayed. If however the caller's number is included in the
phonebook of your Cordless telephone, the corresponding name
may be displayed instead.
Handsfree:
Press to answer the call in handsfree speaking mode
You are connected to the caller via the loudspeaker and
microphone.

Operating area

You can use your Cordless telephone in the area that is covered by
the network. Outside this area, you will lose contact with the
telephone network. The signal strength icon will disappear. "No
Network" will be displayed repeatedly, the warning light will flash
and short, fast, warning beeps will be heard at regular intervals.
TD 92282GB
Cordless telephone OfficeT
2006-05-24/ Ver. B