Cordless telephone OfficeT
2006-05-24/ Ver. B
No network
The Cordless telephone is not connected to a telephone network.
•
You cannot make or answer calls.
See section "Networking" on page 70, or contact your system
administrator.
After switching on, the Cordless telephone is in stand-by mode. In
stand-by mode, the Cordless telephone is ready to make or receive
calls and consumes little energy. In this mode the display may show
several icons and other information. For more details see section
"Information on
display" on page 29.
Tip: If you are not using the Cordless telephone to make
or receive calls, you can put the Cordless telephone in the
charger to keep it fully charged.
Navigation keys
Confirm
Left/Up
Menu structure
Several functions of the Cordless telephone and the network can
be accessed via the Cordless telephone menus. The charts below
give an overview of the most important top level menu items to help
you locate those functions.
Cancel
TD 92282GB
Getting Started
Back
Right/Down
19
Need help?
Do you have a question about the OfficeT and is the answer not in the manual?
Questions and answers