Making And Receiving Calls - ASCOM OfficeT User Manual

Cordless telephone OfficeT
2006-05-24/ Ver. B

Making and receiving calls

If your Cordless telephone is switched on, and connected to a
telephone network, you can make and receive calls. Check if a
network name is displayed and one or more bars of the signal
strength icon are on. If not, see section "Networking" on page 70 or
contact your system administrator or supplier.
Making a call
After switching on, the Cordless telephone is in stand-by mode. In
this mode the Cordless telephone is ready to make calls.
Dialling while on hook:
Enter the number
The number is displayed.
00535554505
Press when the number is correct
Press to end the call
The duration of the call is displayed.
Dialling while off hook:
Press and hold and wait for the dial tone
z
Note: A short press activates the CallList.
Enter the number and wait for a connection
0:00:23
00535554505
Press to end the call
The duration of the call is displayed.
TD 92282GB
Getting Started
23