Selecting A Network - ASCOM OfficeT User Manual

Getting Started
28
In network range
Only if the Cordless telephone is in range of a network it can
connect to that network.
If the signal strength icon is off (not visible) and the messages "No
network" or "No access" are displayed repeatedly, then the
Cordless telephone is not connected to a network.
No network
This may mean:
• You are out of range.
• There is no access to the network.
The Cordless telephone is not able to connect. Set the Cordless
telephone to automatic network selection
Route: Networks » SelectNet » Automatic
• There is no subscription to the network.
Subscribe the Cordless telephone to the network.
Network subscription
To get access to the network you have to subscribe the Cordless
telephone to a network. Once subscribed you can access the
network at any time when within network range.

Selecting a network

The coverage area of different telephone networks may overlap. In
that case you can select the telephone network you want if the
Cordless telephone has been subscribed to it.
TD 92282GB
Cordless telephone OfficeT
2006-05-24/ Ver. B