ASCOM OfficeT User Manual page 17

Cordless telephone OfficeT
2006-05-24/ Ver. B
Battery
The Cordless telephone is powered by a rechargeable battery. You
can fully charge a flat battery by placing the Cordless telephone in
the charger for 4 hours. A fully charged battery gives you up to 17
hours calling time or up to 140 hours stand-by time.
Note: The calling time and stand-by time is shortened if the
handsfree speaking function is used a lot.
The Cordless telephone has a battery meter, which indicates the
power left in the battery.
Note: The Cordless telephone is powered by a Nickel Metal
Hydride(NiMH) battery. It can be recharged at any time. To
keep the battery fully charged, you can put or leave the
Cordless telephone in the charger without any problem.
Reading the battery meter
When the battery is fully charged, the "Battery icon" on the
Cordless telephone display consists of four blocks. The number of
blocks decreases as the battery discharges. If the battery is almost
flat, the "Battery icon" and the red light on the Cordless telephone
flash. An alarm sounds if there is less than 15 minutes calling time
left in the battery.
TD 92282GB
Getting Started
15