Selecting A Network Automatically - ASCOM OfficeT User Manual

Networking
SelectNet
L M
76

Selecting a network automatically

The Cordless telephone can connect to a network automatically.
This may solve out of range ("No network") or network access
problems ("No Access"). The network selection is retained if the
phone is switched off and back on.
To have automatic network selection
Route: Networks » SelectNet
Choose
Press
"Automatic" or the currently selected network is displayed.
If necessary select Automatic
Press to confirm
The Cordless telephone tries to connect to a subscribed network in
the order of the prioritized subscription list. If only a network name
is displayed and "No network" is displayed repeatedly, the Cordless
telephone has not connected to a network. The Cordless
telephone is out of range or a network subscription is required. See
section "Subscribing to a
system administrator.
network" on page 72, or contact your
Cordless telephone OfficeT
TD 92282GB
2006-05-24/ Ver. B