Switching On The Cordless Telephone - ASCOM OfficeT User Manual

Getting Started
18
To remove the clip from the Cordless telephone
Note: To minimize wear and tear, we recommend that you
do not remove the clip from the telephone too often.

Switching on the Cordless telephone

To switch on the Cordless telephone
Press for at least one second until the stand-by display
appears
The number on the upper right-hand side of the display is the
(internal) number of the Cordless telephone
Work 132
01-Dec 11:32
What to do if...
• The display does not come on or the battery icon starts flashing:
Charge the battery. See section
• The signal strength icon is off and the message "No
network" will be displayed repeatedly:
"Charging the battery" on page 16.
Cordless telephone OfficeT
2006-05-24/ Ver. B
TD 92282GB