Mounting To Shop Floor - Grizzly G0664 Owner's Manual

Mounting to Shop
floor
although not required, we recommend that you
mount your new machine to the floor. Because
this is an optional step and floor materials may
vary, floor mounting hardware is not included.
generally, you can either bolt your machine to
the floor or mount it on machine mounts. Both
options are described below. Whichever option
you choose, it is necessary to level your machine
with a precision level.
Bolting to Concrete floors
lag shield anchors with lag bolts and anchor
studs (figure 9) are two popular methods for
anchoring an object to a concrete floor. We sug-
gest you research the many options and methods
for mounting your machine and choose the best
that fits your specific application.
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
anchor stud
lag shield & lag Bolt
figure 9. typical fasteners for mounting to
concrete floors.
g0664 heavy duty Metal-Cutting Bandsaw
Using Machine Mounts
using machine mounts, shown in figure 10, gives
the advantage of fast leveling and vibration reduc-
tion. the large size of the foot pads distributes
the weight of the machine to reduce strain on the
floor.
figure 10. Machine mount example.
NOTICE
We strongly recommend securing your
machine to the floor if it is hardwired to the
power source to avoid conduit damage from
accidental machine movement. Consult with
your electrician to ensure compliance with
local codes.
-17-