Rear Wheel Removal - Honda CTX200 Owner's Manual

Rear Wheel Removal

1. Raise the rear wheel off the ground by
placing a support block under the engine.
2. Remove the rear brake adjusting nut (1),
disconnect the brake rod (2) from the
brake arm (3) by pushing down on the
rear brake pedal.
(1)
(3)
(4)
(1) Adjusting nut
(2) Brake rod
(3) Brake arm
(2)
(6)
(5)
(6) Rear axle
3. Loosen the drive chain lock nuts (4) and
adjusting nuts (5).
4. Remove the axle nut (6) while holding
the rear axle at the other end with a
wrench.
5. Pull out the rear axle (7).
6. Remove the drive chain from the drive
sprocket by pushing the rear wheel
forward.
7. Remove the rear wheel.
(7)
(5)
(4) Lock nut
(5) Adjusting nut
(4)
(7) Rear axle
81