Operation Pre Ride Inspection - Honda CTX200 Owner's Manual

OPERATION
PRE-RIDE INSPECTION
For your safety, it is very important to take
a few moments before each ride to walk
around your motorcycle and check its
condition. If you detect any problem, be
sure you take care of it, or have it corrected
by your Honda dealer.
Improperly maintaining this motorcycle
or failing to correct a problem before
riding can cause a crash in which you
can be seriously hurt or killed.
Always perform a pre-ride inspection
before every ride and correct any
problems.
40
1. Engine oil level add engine oil if
required (page 27
2. Fuel level fill fuel tank when necessary
(page 24 ). Check for leaks.
3. Front and rear brakes check operation;
make sure there is no brake fluid leakage.
Adjust f ree play if necessary (pages
15 18 ).
4. Tyres check condition and pressure
(pages 28 32
5. Drive chain check condition and slack
(page ). Adjust and lubricate if
70
necessary.
6. Throttle check for smooth opening and
full closing in all steering positions.
7. Lights and horn check that headlight,
tail/brake light, turn signals, indicators
and horn function properly.
8. Engine stop switch check for proper
function (page
34
). Check for leaks.
).
).