Clutch - Honda CTX200 Owner's Manual

CLUTCH

Clutch adjustment may be required if the
motorcycle stalls when shifting into gear or
tends to creep; or if the clutch slips, causing
acceleration to lag behind engine speed.
Minor adjustments can be made with the
clutch cable adjuster ( ) at the lever ( ).
Normal clutch lever free play is:
10 20 mm (0.4 0.8 in)
Pull back the rubber dust cover ( ).
1.
Loosen the lock nut ( ) and turn the
adjuster ( ). Tighten the lock nut ( )
4
and check the adjustment.
(1)
(1) Clutch lever
4 1
3
2. If the cable adjuster is threaded out near
its limit or the correct free play cannot be
obtained using the cable adjuster ( ), a
major adjustment must be made. Loosen
the lock nut ( ) and turn in the cable
adjuster ( ) completely. Tighten the lock
nut ( ) and install the rubber dust cover
3
( ).
2
2
3
(2) Dust cover
(3) Lock nut
(4) Clutch cable adjuster
3
4
(3)
(B)
(A)
(A) Increase free play
(B) Decrease free play
4
(4)
(2)
19