Table of Contents
Advertisement
SECTION 4: ASSEMBLY
Overview
Most of your G9922 Oscillating Spindle Sander
has been assembled at the factory. The few
pieces that remain should go together quickly and
easily. Only a few common tools are required to
assemble your oscillating spindle sander. 12 x
14mm and 17 x 19mm double-end wrenches, as
well as an 8mm Allen
the machine. The following list provides the rec-
ommended order in which the sander should be
assembled:
• Steel Stand
• Sanding Unit and Stand
• Table and Sanding unit
• Spindle Sander
Before beginning the assembly process, we rec-
ommend you become familiar with the Model
G9922 Oscillating Spindle Sander's parts and
controls. See the Parts Diagram at the end of the
manual for details.
All die-cut metal parts have a sharp edge
(called "flashing") on them after they are
formed. This is generally removed at the
factory. Sometimes a bit of flashing might
escape inspection, and the sharp edge may
cause cuts or lacerations when handled.
Please examine the edges of all die-cut
metal parts and file or sand the edge to
remove the flashing before handling.
G9922 Oscillating Spindle Sander
®
wrench are provided with
-9-
Advertisement
Table of Contents
