Keep work area well lighted. G9907 Triangular Sander SAFETY Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
Page 4
Check for alignment of moving parts, binding of moving parts, breakage of parts, mount- ing, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced. G9907 Triangular Sander PARTS.
Page 5
Commentary We are proud to offer the Grizzly Model G9907 Triangular Sander. The Model G9907 is part of a growing Grizzly family of fine power tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commit-...
Attaching Abrasives Abrasive sheets are easily attached with the hook-and-loop system on the pad of your G9907 sander. Fit the sheet over the pad so that it covers the entire area, push and slightly twist to make sure the coated abrasive sheet is snug on the pad.
Keeping Tool Clean Your G9907 Triangular Sander will give you years of trouble free service if you keep it clean and free of built-up dust or grime. Ensure that no air passages get blocked.
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main- tenance.
14. Do you think your purchase represents good value? 15. Would you recommend Grizzly to a friend? 16. Would you allow us to use your name as a refer- ence for Grizzly customers in your area? Note: We never use names more than three times. 17.Comments:________________________________...
Page 10
Send a Grizzly Catalog to a friend: Name________________________________ Street________________________________ City______________State______Zip_______ FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE...