Grizzly G0679 Owner's Manual page 19

9.
attach the two belt cover latch assemblies to
the platen assembly frame with (4)
flange bolts, as shown in figure 19.
Belt Cover
latch
assembly
Flange Bolts
figure 19. Lid latches.
10. Connect the idler wheel assembly to the plat-
en assembly frame with (4)
bolts, as shown in figure 20.
platen assembly Frame
idler Wheel
assembly
figure 20. Idler wheel assembly.
g0679 stroke/Edge sander
1 ⁄ -20 x 1 ⁄
4 2
platen assembly
Frame
⁄ -18 x ⁄ flange
5 1
16 2
Flange Bolts
11. secure the idler wheel box to the platen
assembly with (2) 5
⁄ -18 hex nuts, as shown in figure 21.
5
16
platen assembly
figure 21. Idler wheel box.
12. open the platen cover, align it with the idler
wheel cover, then secure the two together
with (3) ⁄ -20 x ⁄
1 1
4 2
hex nuts, as shown in figure 22. Close and
latch the platen cover.
figure 22. Platen cover connection.
⁄ -18 x 1 ⁄ flange bolts and
16 2
idler Wheel
assembly
flange bolts and (3) ⁄ -20
1
4
idler Wheel
Cover
-17-