How To Charge Scooter; Checking & Understanding The Charging Process & Light - X-TREME X-370 Owner's Manual

How to Charge Scooter

1) Switch the Master Kill Switch in the On position. Do not turn the key on.
2) Plug the battery charger into the X-370 Charge Socket and an 110v outlet
3) The Charger indicator lights should be Red and Green initially. When fully charged
there will be Two Green lights.
Checking & Understanding the Charging Process & Light
Status Indicators
How To Check Charger Light Status
1) When you first plug the charger into the wall receptacle what color lights do you see on
the charger?
2) When you plug your charger into the wall receptacle and the charge socket what color
lights do you see?
3) If the scooter charger light does not turn Red then check the wire connections on the
back of the charger port.
How To Understand Charger Light Sequence:
- When you plug your charger into the wall the light should turn Green.
- Plug your charger into the scooter and it should turn to Red for a good period of time.
* This indicates that the charger sees the batteries and charge cycle started.
- If No Red light then charger is not making a connection to batteries to charge them.
- Check for a loose wire on the back of the charge socket or bad fuse/fuse holder.
- If the charger just turns Red for a minute or two, this may indicates a defective cell in one
of the batteries and batteries will need to be replaced.
*** A defective cell reacts like a fully charged battery and will bring other batteries down to
its level.
- If a flashing Red light appears on the charger, this may indicate the charger wires are
crossed and/or touching each other.
*** In most cases if the scooter runs a shorter distance the batteries may be beyond their
life cycle.
21