X-TREME X-370 Owner's Manual page 17

Place the two rubber bushings on the rack.
Then place the trunk on the rack over the rubber bushings. The two metal plates are
placed inside the trunk and secured to the rack with the four enclosed screws and nuts.
Attaching Seat Post & Seat
Insert the seat post and seat. Insert the small end of the seat post into the bottom of the
seat and tighten the nuts. Next insert the seat post into the post on the scooter where the
seat clamp from the trunk rack is located. Adjust the height and then tighten the clamp to
secure the seat in place.
Attaching the Handlebars To Scooter
Attach the handlebars to scooter. Insert the handlebar into the handlebar post being sure
to align the lock pin with the handlebar. Position the clamp just under the locking pin and
tighten it in place securely.
17