3.3 Editing the transponder list
To change the information of a satellite entry, perform the
following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Choose your desired transponder at the Frequency op-
tion or enter it with the numeric buttons.
3. Change the Polarization option to the polarization of your
desired transponder.
4. Change the Modulation option to the modulation type of
your desired transponder. If your desired transponder
has high definition broadcasts, you should set this option
to DVB-S2 QPSK or DVB-S2 8PSK. Then the FEC option
and the Pilot option will become enabled. You should
also set these options correctly.
5. To change a satellite entry's name, select your desired
entry at the Satellite Name option and select the SAT
Name Edit option. Then the on-screen keyboard appears.
Change the name and save it.
See §
6.3
for how to use the on-screen keyboard.
3.3 Editing the transponder list 31
You can change satellite informa-
tion.
Select the Installation
Edit menu. You should see a
screen like the left figure.
SAT/TP
3