Connecting To Your Television Set - Topfield srp-2300 User Manual

14 Setup

2.4.2 Connecting to your television set

To use the HDMI output
HDMI loop-through via the HDMI input
LNB frequency and polarisation specified by the digital re-
ceiver. So if you have linked from the LNB 1 OUT connector
to the LNB 2 IN connector, you would have some limitations
in using some features such as dual recording. Likewise, if
you have another digital receiver linked from the LNB 2 OUT
connector, you can only use it limitedly. See
details.
For all the following connections of the digital receiver, we rec-
ommend you to use the first connector to get the best picture
quality. If your television does not have a matching connector,
then use the next connector in the following order for a better
picture quality.
1. HDMI connector (HDMI)
2. Component connector (YPbPr)
3. Composite connector (VIDEO)
You should configure audio and video settings after connect-
ing up the digital receiver. See
The digital receiver can switch the output of an high defini-
tion video from the digital receiver to that from another HD
device connected to the HDMI IN socket on the digital receiver.
§4.2
If you have a high definition television set,
you should use an HDMI cable for best re-
sults. Plug one end of the cable into the HDMI
socket on the digital receiver, and plug the
other end into the matching socket on your
television.
§3.1 for more
for a detailed description.