using the digital receiver, you should keep it plugged into
a wall socket to be in standby mode so that it can run timer
events at any time.
1.2.1 Front panel
The front panel of the digital receiver has buttons to control
status. The following indicates what they mean.
Front display shows the current time in standby mode, and
MENU button displays the main menu. It is also used to return
OK
CHANNEL
VOLUME
1.2 Controlling the digital receiver 3
button switches the digital receiver between standby mode
and active mode.
displays the current service in active mode.
to the previous menu from a submenu.
button displays the services list. See §5.2.1 for more de-
tails. It is also used to select a menu item.
,
buttons switch to the previous or next ser-
vice.
,
buttons decrease or increase the volume.
There is a USB port on the front panel for
firmware update and data transfer.
d a display to indicate its
1