About This Manual; Manual Organization; Conventions Used In The Manual - Supermicro PDSML-LN1+ User Manual

Hide thumbs Also See for PDSML-LN1+:
Table of Contents

Advertisement

About This Manual

This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
PDSML-LN1+/PDSML-LN2+/PDSML-E+ motherboard. It supports single
Intel® Xeon ® 3200/3000, Core™ 2 Duo Series, Pentium ® D (Dual-Core), Pentium
4, and Celeron ® D LGA (Land Grid Array) 775 Processors at system bus speeds of
1066/800/533 MHz. The processor is housed in a Flip-Chip Land Grid Array (FC-
LGA4) package that interfaces with the motherboard via an LGA775 socket. The
PDSML-LN1+/PDSML-LN2+/PDSML-E+ also supports Intel Hyper-Threading (HT)
technology, EM64T technology, Enhanced Intel SpeedStep ® Technology (EIST) and
Matrix Storage Technology. Please refer to the motherboard specifications pages
on our web site (http://www.supermicro.com/products/motherboard/) for updates or
visit Intel's web site for processor support. This product is intended to be installed
and serviced by a professional technician.

Manual Organization

Chapter 1 describes features, specifications and detailed information about the
motherboard and the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into
the system.
Chapter 3 describes troubleshooting procedures for the video, the memory and the
system setup stored in CMOS if you encounter problems.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A and Appendix B list BIOS POST Error Codes and Messages. Ap-
pendix C provides Software Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation
of the components and to prevent damage done to the components or injury to
yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation or
to prevent damage to the components.
Note: Additional Information given to differentiate various models or to ensure
correct system setup.
Preface
iii
Preface

Advertisement

Table of Contents
loading

Table of Contents