Table of Contents
Advertisement
4-4
Advanced Setup
Choose Advanced from the Phoenix BIOS Setup Utility main menu with the arrow
keys. You should see the following display. The items with a triangle beside them
have sub menus that can be accessed by highlighting the item and pressing <Enter>.
Options for PIR settings are displayed by highlighting the setting option using the
arrow keys and pressing <Enter>. All Advanced BIOS Setup options are described
in this section.
Boot Features
Access the submenu to make changes to the following settings.
QuickBoot Mode
If enabled, this feature will speed up the POST (Power On Self Test) routine by
skipping certain tests after the computer is turned on. The settings are Enabled
and Disabled. If Disabled, the POST routine will run at normal speed.
Quiet Boot
Set to Enabled to display full screen during POST. The settings are Enabled
and Disabled.
POST Errors
Enable this feature to force the system to pause and display an error message during
POST when an error is detected. The settings are Enabled and Disabled.
4-7
Chapter 4: BIOS
Advertisement
Table of Contents
