Table of Contents
Advertisement
PDSML-LN1+/PDSML-LN2+/PDSML-E+ User's Manual
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify if you want to redirect the console to Onboard COM
A or to Onboard COM B. This setting can also be Disabled.
BAUD Rate
This item allows you to select the BAUD rate for console redirection. The options
are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows the user to choose from the available options the desired console
type for console redirection. The options are VT100, VT100,8bit, PC-ANSI, 7bit,
.
PC ANSI, VT100+, VT-UTF8 and ASCII
Flow Control
This item allows you to choose from the available options the flow control for console
redirection. The options are: None, XON/XOFF, and CTS/RTS.
Console Connection
This item allows you to decide how Console Redirection is to be connected: either
Direct or Via Modem.
Continue CR after POST
This item allows you to decide if you want to continue with console redirection after
the POST routine. The options are On and Off.
Hardware Monitoring
4-16
Advertisement
Table of Contents
