Table of Contents
Advertisement
PDSML-LN1+/PDSML-LN2+/PDSML-E+ User's Manual
2-2
Processor, Heatsink and Fan Installation
!
Notes: 1. Always connect the power cord last and always remove it before adding,
removing or changing any components. Make sure that you install the processor
into the CPU socket before you install the CPU heatsink.
2. Intel's boxed processor package contains the CPU fan and heatsink assembly. If
you buy a CPU separately, make sure that you use an Intel-certified multi-directional
heatsink and fan.
3. The LGA 775 heatsink and fan comes with a push-pin design and no tool is
needed for installation.
4. When purchasing an LGA 775 CPU or when receiving a motherboard with an LGA
775 CPU pre-installed, make sure that the CPU plastic cap is in place and none of
the CPU pins are bent; otherwise, contact the retailer immediately.
5. Refer to the MB Features Section for more details on CPU support.
Installation of the LGA775 Processor
1. Press the
the load plate, which covers the CPU
socket, from its locking position.
2. Gently lift the socket clip to open the
load plate.
When handling the processor package, avoid placing
direct pressure on the label area of the fan.
socket clip to release
Socket Clip
Load Plate
Load Plate
2-2
Advertisement
Table of Contents
